LEDs and Jacks: Difference between pages

From PedalPCB Wiki
(Difference between pages)
Jump to navigation Jump to search
No edit summary
 
(Created page with "== 1/4" jacks == File:1-4" Jack Pinout.jpg == DC power jacks == File:DC Jack Pinout.png")
 
Line 1: Line 1:
== Footprints  ==
== 1/4" jacks ==
Proper LED orientation varies depending on the symbol printed on the PCB.
[[File:1-4" Jack Pinout.jpg]]


<gallery mode="nolines" widths="250" heights="250" perrow="3">
File:LED-Footprint-Standard.jpg|Standard LED footprint
File:LED-Footprint-5mm.jpg|5mm LED footprint
File:LED-Footprint-3mm.jpg|3mm LED footprint (no longer used)
</gallery>


==== Standard LED footprint ====
== DC power jacks ==
This is the standard LED symbol that will be used by all PedalPCB projects.    All other LED footprints will be progressively phased out.  Note that the Cathode of the LED is installed into the square pad of the PCB.
[[File:DC Jack Pinout.png]]
 
==== 5mm LED footprint ====
This is the footprint commonly used for 5mm LEDs.  Note that the Cathode of the LED is installed into the square pad of the PCB.
 
==== 3mm LED footprint ====
This is the footprint commonly used for 3mm LEDs.  The pinout of this footprint is technically incorrect; the Anode is installed into the square pad of the PCB.  This footprint will be progressively phased out of all projects as new stock is ordered.

Revision as of 04:54, 2 January 2023

1/4" jacks

File:1-4" Jack Pinout.jpg


DC power jacks

DC Jack Pinout.png