|
|
| Line 1: |
Line 1: |
| This is the testing area for the '''PedalPCB Wiki'''. The information listed here is for experimental purposes only.
| | 125B |
| == Component References ==
| | Inner Depth - 32mm |
| * [[Potentiometers]]
| |
| * [[LEDs]]
| |
| * [[Jacks]]
| |
| * [[SMD Component Lookup]]
| |
| * [[EIA-96 SMD Resistor Codes]]
| |
| * [[Op Amp Slew Rates]]
| |
| * [[Resistor Color Code Chart]]
| |
| * [[Enclosure Dimensions]]
| |
|
| |
|
| == Wiring Diagrams ==
| | 1590A |
| * [[Standard True-Bypass Wiring]]
| | Inner Depth - 25mm |
| * [[2-in-1 Pedal Wiring]]
| |
| * [[2-in-1 Pedal Wiring (Single Footswitch)]]
| |
| * [[2-in-1 Pedal Wiring (AB)]]
| |
| * [[3PDT Order Switch Wiring]]
| |
| * [[Expression Control Wiring]]
| |
| * [[DPDT ON/ON/ON as 3-way Switch]]
| |
| * [[StompBoxParts 3PDT Breakout Board]]
| |
|
| |
|
| == To Do ==
| | Tayda Sidewall Y-Center (0,0) - 13.55mm from enclosure rim |
| * Basic Electronics Theory
| |
| * Resistors
| |
| * Capacitors
| |
| * Diodes
| |
| * Transistors
| |
| * Integrated Circuits
| |
| * Enclosures
| |
| * [[Switches]]
| |
| ** [[Momentary vs Latching]]
| |
| ** [[Normally Open vs Normally Closed]]
| |
| ** [[Make before Break vs Break before Make]]
| |
| ** [[ON/ON]]
| |
| ** [[ON/OFF/ON]]
| |
| ** [[ON/ON/ON]]
| |
| ** [[SPST]]
| |
| ** [[SPDT]]
| |
| ** [[DPDT]]
| |
| ** [[3PDT]]
| |
| ** [[4PDT]]
| |
| ** [[Rotary Switches]]
| |
| * [[PCB list by SKU]]
| |
| * [[JFET chart]]
| |
| * [[Spin FV-1]]
| |
Revision as of 00:08, 11 February 2024
125B
Inner Depth - 32mm
1590A
Inner Depth - 25mm
Tayda Sidewall Y-Center (0,0) - 13.55mm from enclosure rim