Using the FV1Dev on Apple macOS

From PedalPCB Wiki
Revision as of 20:33, 6 January 2023 by PedalPCB (talk | contribs) (Created page with "This method has been tested on macOS Sierra and Mojave. Other versions may work, but have not been verified. == Installation == Open a Terminal window and enter the following: Step 1: '''Install Homebrew''' <code><nowiki>/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"</nowiki> </code> Step 2: '''Install libusb''' <code> brew install libusb </code> Step 3: '''Install SRecord''' <code> brew install srecord </cod...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This method has been tested on macOS Sierra and Mojave. Other versions may work, but have not been verified.

Installation

Open a Terminal window and enter the following:

Step 1: Install Homebrew

/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"


Step 2: Install libusb

brew install libusb


Step 3: Install SRecord

brew install srecord


Step 4: Download FV1Dev Bundle for macOS

[Download FV1Dev Flash Tool]

Usage Notes

Read EEPROM data to .bin file

ch341eeprom -s 24c32 -r <filename.bin>

Write .bin file to EEPROM

ch341eeprom -s 24c32 -w <filename.bin>

Convert BIN to HEX

srec_cat <filename.bin> -binary -o <filename.hex> -intel

Convert HEX to BIN

srec_cat <filename.hex> -intel -o <filename.bin> -binary

Retrieved from "https://wiki.pedalpcb.com/index.php?title=Using_the_FV1Dev_on_Apple_macOS&oldid=83"